Brother RJ-3050 User Manual page 81

Printer Setting Tool
Advanced Tab
1 Disable these settings
When this check box is selected,
changed.
The settings in a tab where
addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
[Export] command is executed.
To apply the settings to the printer or save or export them, be sure to clear the check box.
2 Feed Key Function
Select the operation that is performed when the
If [Program Settings] is selected, click the [File] button and select the command file.
Available settings: [Feed], [Program Settings]
3 Printer Information Report
Select which sections are printed when printing the printer setup information.
Available settings: [All], [Usage Log], [Printer Settings], [Printer Transfer Data]
(See Printing the Printer Set-up Information on page 115.)
4 Beeper
Select whether the printer beeps when an operation panel button is pressed.
Available settings: [On], [Off]
5 Serialize Mode
Select whether or not to serialise from the last number printed.
Available settings: [Cont From Last], [From Starting#]
6 Save Printer Print Log
Select whether or not to save the printer's print log. If [Disable] is selected, [Tools] - [Save Print Log in
File] cannot be performed.
Available settings: [Enable], [Disable]
1
2
3
4
5
6
7
appears in the tab, and the settings can no longer be specified or
appears will not be applied to the printer even if [Apply] is clicked. In
(Feed) button is pressed.
3
3
72