Brother RJ-3050 User Manual page 83

Printer Setting Tool
3 Media Sensor (Reflective/Bar)
The following reflective/black mark sensor parameters can be adjusted.
[Mark Detection Sensitivity]
Adjust the precision of the sensor that detects the black marks.
Available settings: -2–+2
[Luminescence Adjustment]
Adjust the amount of light emitted by the reflective/black mark sensor.
Available settings: -2–+2
4 Media Sensor (Peeler) (RJ-3150 only)
If RJ-3050 was selected for [Printer], this item is unavailable. Specify the settings when the label peeler
is used.
Adjust the precision of the sensor that detects whether the label has been peeled.
Available settings: -2–+2
Display Settings (1) (RJ-3150 only)
This appears only if RJ-3150 is selected for [Printer].
1 Disable these settings
When this check box is selected,
changed.
The settings in a tab where
addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
[Export] command is executed.
To apply the settings to the printer or save or export them, be sure to clear the check box.
2 Unit
Select the measurement units for displayed settings.
Available settings: [mm], [inch]
1
2
3
4
5
6
7
8
9
10
11
12
appears in the tab, and the settings can no longer be specified or
appears will not be applied to the printer even if [Apply] is clicked. In
3
3
74