Connecting To A Dc Power Outlet (Optional) - Brother PJ-722 Online User's Manual

Setting Up the Printer

Connecting to a DC Power Outlet (Optional)

Connect the printer to your vehicle's 12 V DC power outlet (cigarette lighter or similar) to power the printer or
charge the rechargeable Li-ion battery using the vehicle's DC power.
a
Connect the car adapter to the vehicle's 12 V DC power outlet.
b
Connect the car adapter to the printer.
1 Car adapter
Note
• The car adapter is an optional accessory.
• The voltage supplied by a vehicle may fluctuate, and printing speed may vary.
• The maximum voltage is 12 V DC.
• The car adapter plug is not compatible with other outlets that are not the 12 V cigarette type.
• When the car adapter is connected to charge the rechargeable Li-ion battery, the amount of voltage
required to fully charge the battery may not be supplied by the DC power socket.
If 9 hours have passed since charging started, the STATUS indicator turns off and charging stops even if
the rechargeable Li-ion battery has not been fully charged.
1
1
1
15