Digital Watchdog Stand-alone DVMR User Manual page 5

8Channel stand-alone DVMR
Speed of playback in DVMR unit according to scan rate set in 4-7-b).
Scan rate set in 4-7-b)
1x
2x
4x
8x
16x
32x
64x
Maximum playback speed of DVMR is 60x.
10 : Command button.
We have 3 different buttons, that are, save, print, and event, and those buttons work only when stop
button is pressed.
a) Save
During searching recorded pictures, you can save pictures one by one in the folder in client PC by
pressing save button. Press Save button while you see recorded picture, and picture you selected
by pressing Save button shall be save on the folder you already assigned under the file name of
year-month-day-hour-minute-second in jpg format.
b) Print
During searching recorded pictures, you can print picture, one by one, you see, by pressing Print button.
c) Event
Press event button to see alarm list saved in DVMR unit, and you can search recorded pictures based
on event list by clicking any one of list.
11 : Calendar.
You can select date and time to search pictures recorded at selected time and date. You can refer to
start and end of recording in 7.
Notice : From time to time, connection shall be cut unexpectedly due to conditions of network line.
Whenever it is cut, quit search window by pressing power switch(1), and then press connect
button in live-view window and scan button to enter into search window again, to continue searching.
Notice : Compatibility of Remote Viewer Software with different kinds of operating systems and PC hardware
may not be simply specified due to the characteristics of network that it is much related with not only
PC hardware and operating system but also other software installed on the client PC and conditions
of network (internet) line. Basically, Remote Viewer Software is compatible with typical Windows
operating system from Windows 98 to Windows XP.
Notice : To see continuous live view, we recommend not to select motion recording in RECORD SETUP
menu of DVMR. If it is set at motion recording in SETUP menu of DVMR, image transmission is
done only there is motions detected.
Notice : While you search recorded data using client software in client PC, DVMR unit to which you access
via IP network is in playback mode, and no recording is done as far as you search recorded data.
However, while you are in connection with DVMR unit via IP network for live view, DVMR unit
continues to record but at a little lowered recording rate. Therefore we recommend you to access to
DVMR unit only when it is necessary.
ALL ABOUT IMAGE RECOGNITION & PROCESSING
5.Menual for Remote Viewer Software(TCP/IP)
ALL ABOUT IMAGE RECOGINITON & PROCESSING
or or
1x 1x
1x 2x
1x 4x
1x 8x
1x 16x
1x 30x
1x 60x
37
8Channel stand-alone DVMR
Before installing stand alone DVMR, be sure to thoroughly review and follow the instructions in this
User's Manual. Pay particular attention to the parts those are marked NOTICE.
Also, when connecting with external application, first turn the power OFF and follow manual
instruction for appropriate installation.
1. This document is intended for both the administrator and users of stand alone DVMR.
2. This manual contains information for configuring, managing and using stand alone DVMR properly.
3. To prevent fire or electrical shock, do not expose the product to heat or moisture.
4. Be sure to read this manual before using stand alone DVMR Model, even before installing HDD.
5. Check electricity at the place you want to install the DVMR unit is stable and meets our
electricity requirements.
Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
6. Several chips on the main board of the DVMR unit and hard disk drive inside the unit generate
heat, and it must be properly discharged.
Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not close
up an opening (fresh air in-take) on the right side of the unit..
7. Put the DVMR unit at well-ventilated place and do not put heat-generating objects on the unit.
When it is installed inside 19 inch mounting rack together with other devices, please check built-
in ventilation fan of the rack is properly running.
8. For questions and technical assistance of this product, contact your local dealer.
ALL ABOUT IMAGE RECOGINITON & PROCESSING
About this document
Before reading this
document
2