Digital Watchdog Stand-alone DVMR User Manual page 18

8Channel stand-alone DVMR
5) Playback Speed Setup
In playback mode, you can adjust speed of playback by pressing [UP] or [DOWN] button easily. Just press
[UP] button, and you can increase playback speed from 1x to 2x, 4x, 8x, 18x, 32x, or 64x step
by step. In playback speed from 2x to 64x, DVMR system skips a certain numbers of pictures recorded in
sequence as per playback speed selected for fast search.
To the contrary, playback speed is down from 1x to ½ or ¼ by pressing [DOWN] button, Playback speed
lower than ¼ is practically meaningless, and we recommend our users to freeze picture by pressing [FRZ]
button and move picture by picture by pressing [LEFT] or [RIGHT] button for more precise search.
PLAYBACK Speed Setup
3. OPeration
ALL ABOUT IMAGE RECOGINITON & PROCESSING
15
8Channel stand-alone DVMR
8. TCP/IP SETUP
Press [ENTER] button when half-tone green bar is on TCP/IP
SETUP.
TCP/IP setup must be done correctly to access to DVMR unit via
IP network from client PC far apart from DVMR unit.
MAC ADDRESS is not allowed for users to change and it is very
unique number assigned by manufacturer as per IEEE regulation.
IP ADDRESS, IP PORT, SUBNET MASK, and GATEWAY are
what users must input manually, or our DVMR can get those data
automatically in case DVMR unit is connected directly to DHCP
server in IP network.
To input each element of IP data, move small triangular cursor to
the item you want to change, and press [ENTER] button, then
you can change using [UP]/[DOWN] and [LEFT]/[RIGHT] button.
1) Concept of accessing to DVMR unit via IP network
2) Conditions of IP network
a) Accessing to DVMR unit in the same Intranet(LAN)
b) Accessing to DVMR unit via Internet line
For more details of TCP/IP setting in DVMR unit and PC, refer to "Remote Viewer manual".
3. OPeration
ALL ABOUT IMAGE RECOGINITON & PROCESSING
TCP/IP SETUP
24