Design And Function; Installation - ABB TTR200 Operating Instructions Manual

Design and function

Pos: 8 /Überschriften/1/A - C/Aufbau und Funktion @ 0\mod_1129797620733_3101.doc @ 3140
3 Design and function
Pos: 9 /Aufbau und Funktion/Temperatur/TTR200/Aufbau und Funktion @ 15\mod_1195565201671_3101.doc @ 141694
Digital
electronics. For bidirectional communication, an FSK signal is superimposed on the 4 ... 20 mA
output signal via the HART protocol. The transmitters meet the requirements of the IP 20
protection class and are designed for 35 mm rail mounting.
The graphic user interface (DTM) can be used to configure, poll and test the transmitter on a
PC-specific basis. Handheld terminals also support communication.
Pos: 10 /==== Leeres Modul mit einer Absatzmarke, IM, 1-spaltig ==== @ 14\mod_1194422545687_0.doc @ 136717
Pos: 11 /Überschriften/1/M - O/Montage @ 0\mod_1140519732218_3101.doc @ 3159
4

Installation

Pos: 12 /Montage/Temperatur/TTR200/Montage auf einer Hutschiene @ 15\mod_1195567921843_3101.doc @ 141743
The transmitter is mounted apart from the sensor on a 35 mm rail acc. to EN 60175.
Fig. 2
Pos: 13 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
12
transmitters are communication-ready devices
TTR200
with microprocessor-controlled
OI/TTR200-EN