Contrast; Printer - Avery Dennison Monarch 9485 System Administrator Manual

3-1-3. Contrast

This Menu sets Contrast of LCD
1. Select Contrast in Setup Menu.
2. Press the Up(▲) button or Down(▼) button to adjust the contrast.
+( ) -( )
3. Press enter button ( ) to save and exit
22

3-1-4. Printer

In this Menu, you can set Print Contrast, Print Positions and use of various sensors.
**Adjusting the Print Contrast
In this Menu, you can adjust print contrast.
1. Select Setup Menu – Printer – Contrast.
2. Press Up(▲) button to move the cursor one step towards right side (selecting the +/-).
Press Down(▼) button to change the positive/negative setting.
3. Press Up(▲) button to move the cursor one more step to the right.
Press Down (▼) button to increase/decrease the print contrast setting (0 – 9).
Above key operations are described in following table.
+
▶
Press Up(▲) button Press Down(▼) button
[Move cursor. (+00)] [Character is changed]
First position(+00) It changes +/-.
Second position(+00) Changes second position.
Third position (+00) It changes third position.
Press Enter( ) button.
[Exit after stored.]
Store the setting and
then exit.
23