Using The Webui - VTech VSP600 Administrator And Provisioning Manual

Using the WebUI

The Web User Interface (WebUI) resides on the base station. You can access it using
an Internet browser. After you log in to the WebUI, you can configure the base
station and handsets on the following pages:
 System
SIP Account Management
o
Call settings
o
User Preferences
o
Signaling Settings
o
Handset Settings
o
 Network
Basic Network Settings
o
Advanced Network Settings
o
 Contacts
Base Directory
o
Blacklist
o
 Servicing
Reboot
o
Time and Date
o
Firmware Upgrade
o
Provisioning
o
Security
o
Certificates
o
System Logs
o
The WebUI also has a System Status page, where you can view network status and
general information about the base station and handsets. Some of the information on
the status page is also available on the Status menu available on the handset.
To access the WebUI:
1. Ensure that your computer is connected to the same network as the base station.
2. Find the IP address of the base station:
a. On a handset, press MENU.
b. Press  to highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
The Network status screen appears.
d. On the Network status screen, note the IP Address.
Network
IP Address:
10.88.51.133
DHCP:
Enabled
BACK
VSP600/VSP601 Administrator and Provisioning Manual
OK
9 Using the WebUI