VTech VSP600 Administrator And Provisioning Manual page 14

User identifier
Authentication name
Authentication password
Dial Plan
Inter Digit Timeout (secs)
Maximum Number of Calls
Feature Synchronization
DTMF method
Unregister after reboot
VSP600/VSP601 Administrator and Provisioning Manual
Enter the User identifier supplied by your service provider.
The User ID, also known as the Account ID, is a SIP URI
field used for SIP registration. It is also used as part of the
caller ID displayed for outgoing calls.
If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Enter the dial plan, with dialing strings separated by a |
symbol. See Dial Plan on page 15.
Sets how long the handset waits after any "P" (pause) in
the dial string or in the dial plan.
Select the maximum number of concurrent active calls
allowed for that account.
Enables the base station to synchronize with Broadworks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on
the handset menu and WebUI. Similarly, changes using
the handset or WebUI will update the settings on the
server.
Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Enables the base station to unregister the account(s) after
rebooting—before the account(s) register again as the base
station starts up.
14 WebUI: System