VTech VSP600 Administrator And Provisioning Manual page 39

Network Time Settings
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and ranges are listed there.
Setting
Enable Network Time
NTP Server
Use DHCP (Option 42)
Time Zone and Daylight Savings Time Settings
Setting
Time Zone
Automatically adjust
clock for Daylight
Savings
User-defined DST
DST Start: Month
DST Start: Week
DST Start: Day
DST Start: Hour
DST End: Month
DST End: Week
DST End: Day
DST End: Hour
VSP600/VSP601 Administrator and Provisioning Manual
Description
Enables or disables getting time and date information for the
base station from the Internet.
If Enable Network Time
preferred time server.
If Enable Network Time
locate the time server. Option 42 specifies the NTP server
available to the base station. When enabled, the base station
obtains the time in the following priority: 1. Option 42 2. NTP
Server 3. Manual time.
Description
Select your time zone from the list.
Select to adjust the clock for daylight savings time according
to the NTP server and time zone setting. To disable daylight
savings adjustment, disable both this setting and User-
defined Daylight Savings Time.
Select to set your own start and end dates and offset for
Daylight Savings time. To disable daylight savings
adjustment, disable both this setting and
adjust clock for Daylight
If User-defined DST is enabled, set the start date and time
for daylight savings: Month, week, day, and hour.
If User-defined DST is enabled, set the end date and time for
daylight savings: Month, week, day, and hour.
39
is selected, enter the URL of your
is selected, select to use DHCP to
Automatically
Savings.
WebUI: Servicing