VTech VSP600 Administrator And Provisioning Manual page 45

Vendor Class ID (DHCP 60)
User Class Info (DHCP 77)
Resynchronization
Setting
Mode
Bootup Check
Interval
Use encryption
VSP600/VSP601 Administrator and Provisioning Manual
DHCP Option 60 is available to send vendor-specific
information to the DHCP Server.
DHCP Option 77 is available to send vendor-specific
information to the DHCP Server.
Description
Sets which files the base station checks for at regular intervals. It
can check for configuration files, firmware update files (from the
URL entered on the Firmware Server Settings page), or both.
NOTE: When checking for both config and firmware files, the
firmware URL can be within the config file. This firmware URL takes
take precedence over the URL on the Firmware Server Settings
page. It will also update the URL on the Firmware Server Settings
page. This allows you to change the firmware URL automatically.
Sets the base station to check the provisioning URL for new
configuration and/or firmware files upon bootup. The update is
applied as part of the reboot process.
Sets an interval, in minutes, for checking for updates.
Enables an AES-encrypted configuration file to be decrypted before
being applied to the base station. Select if the configuration file
has been secured using AES encryption. See Securing
Configuration Files with AES Encryption on page 56.
45 WebUI: Servicing