System Logs - VTech VSP600 Administrator And Provisioning Manual

System Logs

On the Syslog page, you can enter settings related to system logging activities. It
supports the following logging modes:
 Syslog server
 Volatile file
Under Network Trace, you can capture network traffic related to the base station's
activity and save the capture as a .pcap file. The file can be used for diagnostic and
troubleshooting purposes.
Under Download Log, you can save the system log to a file.
The Syslog settings are also available as parameters in the configuration file. See
"log" Module: Log Settings on page 83.
Syslog
Setting Description
Enable Syslog Enable log output to syslog server.
Server address Syslog server IP address.
Port Syslog server port.
Log Level Sets the log level. The higher the level, the larger the debug output.
VSP600/VSP601 Administrator and Provisioning Manual
 5—ALL
 4—DEBUG
 3—INFO
 2—WARNING
 1—ERROR
 0—CRITICAL
51 WebUI: Servicing