Network" Module: Network Settings; General Configuration File Settings - VTech VSP600 Administrator And Provisioning Manual

Setting:
sip_account.x.mwi_uri
Description: Sets the MWI URI that will be used for MWI subscription. If this
setting is left blank, the base station uses the account x user ID for
MWI subscription.
Values: Text string (SIP URI)

"network" Module: Network Settings

The network settings follow the format: network.[element].

General Configuration File Settings

Setting:
network.rtp.port_start
Description: Sets the Local RTP port range start.
Values: 1–65535
Setting:
network.rtp.port_end
Description: Sets the Local RTP port range end.
Values: 1–65535
Setting:
network.vlan.wan.enable
Description: Enables or disables the WAN VLAN.
Values: 0 (disabled), 1 (enabled)
Setting:
network.vlan.wan.id
Description: Sets the WAN VLAN ID.
Values: 0–4095
VSP600/VSP601 Administrator and Provisioning Manual
Default:
Default:
Default:
Default:
Default:
71 Appendix A: Configuration File Settings
Blank
18000
19000
0
0