Firmware Upgrade - VTech VSP600 Administrator And Provisioning Manual

Firmware Upgrade

You can update the base station with new firmware using the following methods:
 Retrieving a firmware update file from a remote host computer and accessed
via a URL. This central location may be arranged by you, an authorized VESA
dealer, or your SIP service provider. Enter the URL under Firmware Server
Settings.
 Using a file located on your computer or local network. No connection to the
Internet is required. Consult your dealer for access to firmware update files.
Click Manual Upgrade to view the page where you can manually upgrade the
base station firmware.
The firmware upgrade settings are also available as parameters in the configuration
file. See "provisioning" Module: Provisioning Settings on page 75.
Firmware Server Settings
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and ranges are listed there.
Setting
Firmware URL
Server authentication name
Server authentication password
To update the firmware immediately:
1. Click
NOTE: You can also configure the base station to check for firmware updates at
regular intervals. See the Provisioning page.
VSP600/VSP601 Administrator and Provisioning Manual
Description
The URL where the firmware update file resides. This
should be a full path, including the filename of the
firmware file.
Authentication username for the firmware server
Authentication password for the firmware server
.
41 WebUI: Servicing