Advanced Network Settings - VTech VSP600 Administrator And Provisioning Manual

Advanced Network Settings

VLAN
You can organize your network and optimize VoIP performance by creating a virtual
LAN for base stations and related devices.
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and ranges are listed there.
Setting
Enable LAN Port VLAN
VID
Priority
LLDP-MED
Setting
Enable LLDP-MED
Packet Interval (secs)
VSP600/VSP601 Administrator and Provisioning Manual
Description
Enable if the base station is part of a VLAN on your network.
Select to enable.
Enter the VLAN ID (vlan 5, for example).
Select the VLAN priority that matches the Quality of Service
(QOS) settings that you have set for that VLAN ID. Outbound
SIP packets will be marked and sent according to their priority. 7
is the highest priority. NOTE: Configuring QOS settings for your
router or switch is a subject outside the scope of this document.
Description
Enables or disables Link Layer Discovery Protocol for Media
Endpoint Devices (LLDP-MED). LLDP-MED is a standards-based
discovery protocol supported on some network switches. It is
required for auto-configuration with VLAN settings.
Sets the LLDP-MED packet interval (in seconds).
29 WebUI: Network