VTech VSP600 Administrator And Provisioning Manual page 49

User Password
You can set the user password on the WebUI or by using provisioning. For more
information on using provisioning to set the user password, see "profile" Module:
Password Settings on page 90.
To change the User password:
1. Enter the old password (for a new base station, the default password is user).
2. Enter and re-enter a new password. The password is case sensitive and can
consist of both numbers and letters.
3. Click .
Web Server
Setting
HTTP Server port
Enable Secure Browsing
HTTPS Server port
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used,
and you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
VSP600/VSP601 Administrator and Provisioning Manual
Description
Port used by the HTTP server.
Sets the server to use the HTTPS protocol.
Port used by the HTTPS server.
49 WebUI: Servicing