VTech VSP600 Administrator And Provisioning Manual page 77

Setting:
provisioning.resync_mode
Description: Sets the mode of the device's provisioning/firmware file check. This
determines which files the device retrieves when the resync process
begins.
Values: config_only,
firmware_only,
config_and_firmware
Setting:
provisioning.bootup_check_enable
Description: Enables or disables bootup check for configuration and firmware files.
Values: 0 (disabled), 1 (enabled)
Setting:
provisioning.resync_time
Description: Sets the interval (in minutes) between checks for new firmware
and/or configuration file
Values: 0–65535
Setting:
provisioning.remote_check_sync_enable
Description: Enables or disables remotely triggering the device to check for new
firmware and/or configuration files. The file checking is triggered
remotely via a SIP Notify message from the server containing the
check-sync event.
Values: 0 (disabled), 1 (enabled)
Setting:
provisioning.crypto_enable
Description: Enables or disables encryption check for the configuration file(s).
Enable if you have encrypted the configuration file(s) using AES
encryption.
Values: 0 (disabled), 1 (enabled)
VSP600/VSP601 Administrator and Provisioning Manual
Default:
Default:
Default:
Default:
Default:
77 Appendix A: Configuration File Settings
config_and_firmware
1
0 (OFF)
1
0