Barco PHWU-81B User And Installation Manual page 86

Ph series
Table of Contents

Advertisement

8. Lamp relay
→ When you select 1H/24H
→ When the projector is turned off, the setting is cleared and the projector resumes operation from the time of the power-on or
menu setting shown in the preceding step.
1H/24H
NEXT LAMP RELAY
2 3 H
0
1
2
3
4
5
6
OK
Image 8-6
2H/1W
NEXT LAMP RELAY
6 D 2 2 H
0
1
2
3
4
5
6
OK
Image 8-7
9. Move the key cursor using the direction keys to select the number you want to enter and then press the ENTER key.
→ Maximum interval
1H/24H
2H/1W
← key
→ key
DEL key
CLEAR key
→ When the value you entered meets the following conditions, an error dialog box is displayed at the screen center.
-
The value has been cleared by DEL or CLEAR and left blank.
-
The value you entered is out of the setting range.
1H/24H
2H/1W
→ The value of each item is out of the setting range.
D
H
10.When selecting OK, the setting is completed as the lamp-switching interval stored. However, when selecting CANCEL, the setting
is completed without storing.
→ The display returns the LAMP RELAY menu after selecting OK or CANCEL.
→ The setting you made is applied to NEXT LAMP RELAY in the INFORMATION menu.
Important
When you use the projector continuously, the lamp relay may not be performed on time due to errors of the clock function.
Immediately after the power-on, during the lamp selection, or during the lamp relay operation, you cannot change the setting
of LAMP SELECT and LAMP RELAY.
In the case of continuous projection, the lamps may deteriorate earlier unless they are turned off for 1 hour per week.
When using this projector continuously for a long time of period, enable LAMP RELAY.
The brightness and color tint vary at the time of lamp switching.
82
or 2H/1W
, the box to set the lamp relay interval is displayed.
DEL
7
8
9
CLEAR
CANCEL
DEL
7
8
9
CLEAR
CANCEL
23H (23 hours)
6D 22H (6 days and 22 hours)
Shifting the position of enter cursor to the left for each character.
Shifting the position of enter cursor to the right for each character.
Deleting the character in the position of enter cursor for each character.
Deleting all the entered characters.
24H or over
6D 23H or over
7 or over (2H/1W
only)
24 or over
R5905597 PHXX SERIES 20/05/2014

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phwx-81bPhxg-91bPh seriesPhxx series

Table of Contents