Table of Contents
Advertisement
Important
•
When the operation times of both lamps have exceeded 4000 hours
turning on the power. During this time, carry out steps 15 to 20 to reset the lamp operation times.
•
The projector doesn't turn on if the lamp cover isn't attached securely.
•
Be sure to reset the lamp operation time whenever you replace the lamp.
•
Do not reset the lamp operation time unless you replace the lamp.
•
The lamp is fragile. If it is broken, be careful not to cut yourself with glass fragments.
C
AUTION
lamp may be regulated due to environmental considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For the U.S. only.)
3. When LAMP MODE is set to STANDARD, this duration will be shorted to 2000 hours.
R5905597 PHXX SERIES 20/05/2014
:
This projector uses a lamp that contains mercury. Disposal of the lamp or the projector with the
10. Lamp replacement
3
, you can operate the projector only for 3 minutes after
97
Advertisement
Table of Contents
