Table of Contents
Advertisement
1. Safety
To prevent the risk of electrical shock
•
Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk
of fire, electric shock or other personal injury.
•
Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.
•
The power cords for use in the U.S., Europe or China are included with this projector. Use the appropriate one for your country.
•
This apparatus must be grounded (earthed) via the supplied 3 conductor AC power cable. If none of the supplied power cables
are the correct one, consult your dealer.
•
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the
type of power, please consult your appliance dealer or local power company.
•
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them. Pay particular attention to cords at plugs, convenience receptacles, and points where they exit from the appliance. Do
not put the power cord under a carpet.
•
This projector uses the power plug of 3-pin grounding type. Do not take away the grounding pin from the power plug. If the
power plug doesn't fit your wall outlet, ask an electrician to change the wall outlet.
•
The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply using other
voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare an appropriate power
cord separately.
•
If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.
•
Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.
•
Do not overload wall outlets and extension cords as this can result in a fire or electric shock.
•
In order to ensure the safety in case of trouble with the projector, use an electrical outlet having an earth leakage breaker to
supply the power to the projector. If you do not have such outlet, ask your dealer to install it.
•
Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cor
•
Do not plug in or out the power cord with your hand wet. It may cause electric shock.
•
When you move the projector, turn off the power, unplug the power cord from the wall outlet, and then remove the connected
cords. Otherwise, the power cord may be damaged, resulting in fire or electric shock.
•
If dust or metallic substance is on or around the pins of the power plug, unplug the power cord and clean it using a dry cloth.
If you continue to use the projector without cleaning, it may result in fire or electric shock. Clean the power plug periodically at
least once a year.
•
Never push objects of any kind through openings of this projector as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
•
Never spill liquid of any kind on the projector.
•
Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case,
unplug immediately and contact your dealer.
•
This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically
explained in the User Manual do not attempt to service this product by yourself. Please contact your dealer when you want to
fix, adjust or inspect the projector.
•
Do not modify this equipment. It can lead to fire or electric shock.
•
Do not keep using the damaged projector. If the projector is dropped and the cabinet is damaged, unplug the projector and
contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.
•
Be sure to unplug the power cord from the wall outlet if the projector is fractured or deformed. Otherwise, it may result in fire
or electric shock. Ask your dealer for repair.
•
Do not place a container containing water or other liquid on the projector. If water spills on or enters the projector, it may result
in fire or electric shock.
•
Keep foliage plants and pets away from the projector. The temperature around the exhaust vents and that of the cabinet on the
top of the exhaust vents become high. Take special care for small children.
•
The attached power cord is to be used exclusively for this product. Never use it for other products.
•
The socket-outlet shall be installed nearby the equipment and shall be easily accessible.
•
Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and
television reception.
8
R5905597 PHXX SERIES 20/05/2014
Advertisement
Table of Contents
