Enabling Or Disabling The Network Certification; Network Password Settings - Barco PHWU-81B User And Installation Manual

7. Initial network settings
7.2 Enabling or disabling the network certification
About network certification
You can select whether or not to certify the network communication using the network password.
For details, contact your dealer.
How to enable-disable
1. Display the NETWORK menu.
2. Press the ▲ or ▼ key to select NET WORK CERTIFICATION.
NETWORK
CERTIFICATION
Image 7-4
3. Press the ENTER key.
Confirmation dialog appears.
NETWORK CERTIFICATION NETWORK CERTIFICATION
OK : ENTER CANCEL : MENU OK : ENTER CANCEL : MENU
Image 7-5
4. Press the ▲ or ▼ key to select ON
5. Press the ENTER key.
→ To cancel the setting, press the MENU key.
→ It may take some time to reflect the settings.
7.3

Network Password Settings

How to set
1. Display the NETWORK menu.
2. Press the ▲ or ▼ key to select NETWORK PASSWORD.
NETWORK
PASSWORD
Image 7-6
3. Press the ENTER key.
CURRENT NETWORK PASSWORD screen appears.
CURRENT NETWORK PASSWORD
∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗
A B C D E F G H I
N O P Q R S T U V
0 1 2 3 4 5 6 7 8
OK
Image 7-7
4. Press the direction keys to move the key cursor, select the characters or marks to enter, and press the ENTER key.
Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.
← key:
→ key:
DEL key:
caps/CAPS key:
CLEAR key:
→ The default password is "admin".
5. Select OK, and NEW NETWORK PASSWORD screen appears if the entered password is correct.
76
OFF
: ON ON
or OFF
ENTER
← →
DEL
J K L M
caps
W X Y Z
9 CLEAR
CANCEL
Shifting the position of enter cursor to the left for each character.
Shifting the position of enter cursor to the right for each character.
Deleting the character in the position of enter cursor for each character.
Switching an alphabet character to CAPITAL or small.
Deleting all the entered characters.
.
R5905597 PHXX SERIES 20/05/2014