Table of Contents
Advertisement
7. Initial network settings
How to set or clear
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼key to select DHCP.
DHCP
Image 7-11
3. Press the ◄ or ► key to select ON or OFF.
→ When setting DHCP to ON, IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY cannot be set. If you set those settings,
set DHCP to OFF and perform the IP settings as the following procedures.
→ Until the execution of SAVE SETTINGS, the change is not saved.
7.4.3
IP Address Settings
IP Address
Numerical address to identify networked computers.
How to set
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼ key to select IP ADDRESS.
IP ADDRESS
Image 7-12
3. Press the ENTER key.
IP ADDRESS screen appears.
IP ADDRESS
192 . 168 . 0 . 10
0
1
2
3
4
5
6
OK
Image 7-13
4. Press the direction keys to move the key cursor, select the numbers to enter, and press the ENTER key.
Set the numeric value within the range from 0 to 255. However, set the numeric value for the final octet within the range from 1
to 254.
← key:
→ key:
DEL key:
CLEAR key:
5. When selecting OK, the setting is completed as the IP ADDRESS stored temporarily. However, when selecting CANCEL, the
setting is completed without storing.
→ When the setting you entered is correct, the IP CONFIG menu is displayed. If the entered content is not correct, the IP CONFIG
menu is displayed after an error dialog is displayed.
→ Until the execution of SAVE SETTINGS, the change is not saved.
7.4.4
Subnet Mask Settings
Subnet Mask
A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP
Address.
How to set
1. Display the IP CONFIG menu.
2. Press the ▲ or ▼ key to select SUBNET MASK.
78
ON
0. 0. 0. 0
←
→
DEL
7
8
9
CLEAR
CANCEL
Shifting the position of enter cursor to the left.
Shifting the position of enter cursor to the right.
Deleting the character in the position of enter cursor for each character.
Deleting all the entered characters.
R5905597 PHXX SERIES 20/05/2014
Advertisement
Table of Contents
