Table of Contents
Advertisement
2. Select EDGE BLENDING by pressing the ▲ or ▼ key.
EDGE BLENDING
Image 6-11
3. Select ON by pressing the ◄ or ► key.
4. Select SETTING by pressing the ▲ or ▼ key.
SETTING
Image 6-12
5. Select EDGE ADJUST
SETTING - EDGE ADJUST
EDGE SELECT
BLENDING
START POSITION
WIDTH
MARKER
Image 6-13
6. Press the ENTER key.
7. Select an item you want to set by pressing the ▲ or ▼ key.
EDGE SELECT
BLENDING
START
POSITION
WIDTH
MARKER
8. Select a setting value by pressing the ◄ or ► key.
9. Repeat step 7 and step 8, if necessary.
10.Press the MENU key once.
11. Select BLACK LEVEL
SETTING
Image 6-14
12.Press the ENTER key.
SETTING - BLACK LEVEL
INTERLOCKED
RED
GREEN
BLUE
Image 6-15
13.Select an item you want to set by pressing the ▲ or ▼ key.
→ Adjust the black level in areas other than the overlapped areas.
→ When you set INTERLOCKED to ON, you can adjust RED, GREEN, and BLUE simultaneously. When you set it to OFF, you
can adjust RED, GREEN, and BLUE separately.
R5905597 PHXX SERIES 20/05/2014
OFF
EDGE ADJUST
by pressing the ◄ or ► key.
UP
OFF
0
128
OFF
Select the joint you want to adjust from UP, LOW, LEFT, and RIGHT.
When you select ON, the joint selected by EDGE SELECT becomes unnoticeable.
Set the position to start the edge adjustment.
When UP or LOW is selected:
•
0 to 270 (for PHWU-81B)
•
0 to 192 (for PHWX-81B/PHXG-91B)
When LEFT or RIGHT is selected:
•
0 to 480 (for PHWU-81B)
•
0 to 256 (for PHWX-81B/PHXG-91B)
Set the width of the overlap of the joint selected by EDGE SELECT.
When UP or LOW is selected:
•
4 to 524 (for PHWU-81B)
•
4 to 368 (for PHWX-81B/PHXG-91B)
When LEFT or RIGHT is selected:
•
4 to 944 (for PHWU-81B)
•
4 to 496 (for PHWX-81B/PHXG-91B)
The setting range of START POSITION and WIDTH vary depending on their setting values.
When you select ON, a marker for easily locating the overlap of the joint is displayed.
by pressing the ◄ or ► key.
BLACK LEVEL
ON
0
0
0
6. Adjustments with the ADVANCED menu
65
Advertisement
Table of Contents
