Min. Framing Dims. - Rear Vent Configuration; Minimum Framing Dimensions - Rear Vent Configuration - Travis Industries GreenSmart 564 SS Installation Manual

Minimum Framing Dimensions - Rear Vent Configuration

HINT: place the fireplace so the center
line is at least 5" from both vertical framing
members at the rear (this allows the vent
to pass through the framing without
modfications)
Minimum 38" Fireplace
Enclosure Height
Route the
electrical line to
a position to the
left rear of the
fireplace.
© Travis Industries
Installation
(for qualified installers only)
33-1/2"
36-1/2"
Included Firestop (required)
Part # 250-00747
32-1/2"
19-1/4"
4081126
Vent Clearances (8" dia. Vent):
1" to the sides, 1" below, and 4" above
the vent to combustibles.
Center of Rear Vent
24-1/4"
16-1/2"
The on/off switch/thermostat wire (if
used) should be routed to a location
near the right front of the fireplace.
100-01210_000
13