Travis Industries GreenSmart 564 SS Installation Manual page 67

Optional Equipment
13 Attach the blue and white wires to the IPI/CPI switch (see Figure 19). Connect the wiring
harness to the stepper motor (see Figure 20).
14 Attach the wiring harness to the comfort control valve connection (see Figure 21).
15 Place the fan controller near the front of the fireplace to the left and connect it to the wiring
harness (see Figure 22). Attach the power cord from the fan controller to the AC connection (see
Figure 23). MAKE SURE TO TURN THE FAN CONTROLLER ON ("-" SYMBOL).
© Travis Industries
(for qualified installers only)
Figure 19
Figure 22
4081126
67
Figure 20
Figure 21
Figure 23
100-01210_000