Table of Contents
Advertisement
CAUTION: To avoid damage to the battery connector, you must firmly support the connector
while installing or removing a battery.
2.
To install a new system battery, hold the battery with the "+" facing up and slide it under the securing
tabs.
3.
Press the battery into the connector until it snaps into place.
Next steps
1.
Install the cooling shroud.
2.
Follow the procedure listed in
3.
While booting, press F2 to enter the System Setup and ensure the battery is operating properly.
4.
Enter the correct time and date in the System Setup Time and Date fields.
5.
Exit the System Setup.
Hard-drive backplane
The 10–Hard-drive system supports 2.5 inch (x10) SAS/SATA backplane.
Removing the hard-drive backplane
Prerequisites
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Remove all hard drives.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: To prevent damage to the hard drives and hard-drive backplane, you must remove the
hard drives from the system before removing the hard-drive backplane.
CAUTION: You must note the number of each hard drive and temporarily label them before
removal so that you can replace them in the same locations.
Steps
1.
Disconnect the SAS/SATA/SSD data cable(s) and power cable from the backplane.
2.
If applicable, disconnect the power/data cable from the optical drive.
3.
Push the backplane blue release tabs in the direction of the arrows and lift the backplane upwards.
4.
Pull the backplane away from the system until the securing slots on the backplane are free from the
tabs on the chassis.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
87
Advertisement
Table of Contents
Troubleshooting
