Recording The Programmed Titles (Cd Pgm Record) - Kenwood XD-951 Instruction Manual

46
Recording the programmed titles
Program the desired tracks from up to 3 CD discs in the
desired order and record the programmed playback onto
tape.
When the equalizer or SRS 3D is applied to the
sound, the sound with the applied effect can be re-
corded.
Recording preparations are required. •
1
Press the DUBBING key.
2
Select "CD PGM RECORD".
1 Select.
3
Program the desired tracks.
1 Select tracks in the order you want
to play them.
(Perform step 3 on page 32.)
2 Check, replace, add or delete the
programmed tracks as required.
(Perform step 4 on page 33.)
4
Start recording.
Press the ENTER Key.
i
• • •
•
(Steps 1 to 3 )
2 Press SET.
MULTI
CONTROL
SET
ENTER
(CD PGM RECORD)
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected,
cancel it by pressing the STEREO key of the remote control unit.
CD ONE TRACK RECORD (Only during CD playback)
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only when the selected input is TAPE and tapes are
present in both decks A and B)
C D P G M R E C
| Scrolled display (CD PGM RECORD)
To end recording in the middle
Convenient CD recording
XD-951/A900/A700 (En)
7