Table of Contents
Advertisement
To wind tape at high speed
To fast wind in direction |
2
1
÷ Press the 7 key to stop fast winding.
Selection of reverse mode.
REV.MODE
Each press switches the modes as follows.
1 "[" ... Both sides are played back (recorded), and
then the tape stops.
2 """ .. Both sides are played back endlessly.
(The tape stops after recording onto both
sides.)
3 """ .. Only one side is played back (recorded),
and then the tape stops.
÷ Normal (TYPE ), high (TYPE
set automatically.
÷ Remove tape slack before loading.
÷ Close the door securely.
Displays the selected deck.
T
A
P
E
B 0 0 0 0
NR
Displayed when the deck is loaded with a tape.
Reverse mode indication
÷ If the tape transport direction is opposite to the desired direction, press
the play key corresponding to this.
To fast wind in direction \
7
3
¡
), or metal (TYPE
) tape selection is
To stop playback
÷ Do not take out the cassette tape until the tape transport has
stopped completely.
Selection of DOLBY NR
The Dolby NR system minimizes the hiss noise heard when
playing tape. When playing a tape prerecorded with DOLBY
NR ON, be sure to set the DOLBY NR ON for playback.
DOLBY NR
Each press switches the modes as follows.
1 "Ÿ NR" ON ................... DOLBY NR is used.
2 "Ÿ NR" OFF ................. DOLBY NR is not used.
÷ Select the Dolby NR mode according to the recording condition of
the tape.
Dolby noise reduction manufactured under license from Dolby Labo-
ratories Licensing Corporation.
"DOLBY" and the double-D symbol are trademarks of Dolby Labora-
tories Licensing Corporation.
Transport direction indicators
The indicators (2 , 3) indicate the current direction in which the
tape advances when playback or recording is started automati-
cally by the easy operation function, etc. This direction is the
direction stored in memory when the tape was last stopped.
(To switch the tape transport direction, press the play key cor-
responding to the desired direction then press the stop (7) key.)
T
A
P
E
÷ Only the tape transport direction of deck B is shown when the
selected input is other than TAPE.
÷ To see the tape transport direction of deck A, press the A/B key to
switch to deck A.
Please play back tapes recorded with equalizer etc. without
applying any effect.
Note
Note
Let's put out some sound
XD-951/A900/A700 (En)
(Noise Reduction)
Lit when "DOLBY NR" is ON.
T
A
P
E
B 0
NR
B 0 0 0 0
NR
Transport direction indicators
23
Hide quick links:
Advertisement
Table of Contents
