Dolby Pro Logic Surround Playback - Kenwood XD-951 Instruction Manual

52
2
Adjust the volume balance.
1 Generate the test tone.
2 Align the speaker volume with the
main speaker volume.
Center speaker
volume
CENTER
To decrease
3 Stop the test tone.

DOLBY PRO LOGIC surround playback

Before playing a video (or LD) software program carrying
the mark, be sure to complete the "DOLBY
PRO LOGIC surround adjustment".
1
Activate the DOLBY PRO LOGIC mode.
2
Play a video software program.
3
Adjust the volume.
TEST TONE
Surround
speaker volume
To increase To increase
SURROUND
To decrease
TEST TONE
DOLBY
PRO LOGIC
To increase
VOLUME
To decrease
÷ The test tone which is heard like noise moves between speakers at an
interval of 1.5 sec.
÷ The speaker volumes are to be adjusted while listening to the test tone.
The display and test tone output speaker are switched auto-
matically.
In NORMAL and WIDE
BAND mode:
1 TEST L (Left)
2 TEST C (Center)
3 TEST R (Right)
4 TEST S (Surround)
T
÷ Be sure to adjust from your listening position.
÷ The volume level can be adjusted in steps of 1 dB.
÷ The volume levels can be adjusted in the range from -10 dB to +10 dB.
÷ The center level value is memorized as a common setting with DOLBY
3 STEREO.
Q
÷ After several seconds, return is made to the original display.
To cancel DOLBY PRO LOGIC surround play
Effective Sound Adjustment
In PHANTOM mode:
1 TEST L (Left)
2 TEST R (Right)
3 TEST S (Surround)
E s T L
| Scrolled display (DOLBY PRO LOGIC)
D O L B Y P R O
(Center mode display)
N O R M A L
(Delay time display)
D E L A Y 1 5 m s
STEREO
XD-951/A900/A700 (En)