Timer Operation; Sleep Timer (Sleep); Operate Easy To Use Timer; (Operate Easy To Use Timer:o.t.t.) - Kenwood XD-951 Instruction Manual

Timer operation

Sleep timer (SLEEP)

The power is turned OFF automatically after the specified period has elapsed.
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the power is switched off after one hour. This timer
operates only once directly after setting.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously set
time period.
AI timer playback (PROG.1, PROG.2)
When timer playback starts, the volume increases gradually.
AUTO POWER SAVE
When the power is ON and neither recording nor playback is executed for 30 minutes or more, the power is switched off
automatically by this function.
Adjust the clock before setting the timer.
Sleep timer
(SLEEP)
Set the number of minutes after which the power is to be turned OFF.
1 Press the TIMER key.
2 Select "SLEEP" and press the SET
key.
3 Set the time and press the ENTER
key.

Operate easy To use Timer

Timer playback can be set with a simple operation of just setting the time. With this function, the last source selected before
turning power off can be played by the timer. The power turned ON by the timer is switched off automatically in an hour after
the timer playback starts.
1 Select the desired source and adjust
the volume.
2 Press the TIMER key.
3 Select "O.T.T." and press the SET
key.
4 Set the ON time and press the EN-
TER key.
The time
is returned.
5 Switch OFF the power supply.
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
(Operate easy To use Timer : O.T.T.)
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
The time
is advanced.
Adjust the clock before setting the timer.
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
10Ô20Ô30...80Ô90ÔRETURNÔSLEEP OFFÔ10Ô20...
÷ The displayed time changes in 10-minute steps. The maximum time
that can be set is 90 minutes.
÷ The power is turned OFF automatically after the set time has elapsed.
÷ The sleep timer does not operate until O.T.T. operation or program timer
operation has ended.
To cancel
Turn the unit off or select "SLEEP OFF" and press the
ENTER key.
The program timer does not operate until O.T.T. operation
has ended.
At the time of tape playback by timer operation, the B deck
has priority.
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
÷ The ON time can be set in steps of 5 minutes.
To cancel
If you are in the middle of time setting, press the TIMER
key.
If the O.T.T. operation has already been started, turn the
unit off.
XD-951/A900/A700 (En)
Y
L E E P T I M E
s
s L E E P 9 0
O T T
A M 7 O 0
O.T.T.
57
SLEEP