Recording The Programmed Titles (Cd Program Recording) - Kenwood XD-852 Instruction Manual

Recording the programmed titles
Program the desired tracks from up to 3 CD discs in the desired order and record the programmed
playback onto tape.
Recording preparations are required.
1
Check that the CD player is in the
stop mode.
If it is in play mode
2
Select "Recording Options" .
MENU
3
Select "CD Program Recording".
4
Program the desired tracks.
1
Select tracks in the order you want to
play them. (Perform step 3 on page 36.)
2
Check, replace, add or delete the pro-
grammed tracks as required.
(Perform step 4 on page 37.)
5
Start recording.
ENTER
To end recording in the middle
÷ Both the cassette deck and CD player stop.
(Steps 1 to 4)
^
&
SELECT
SELECT
^
&
(CD PROGRAM RECORDING)
XD-7...series :
The equalizer or 3D surround effect applied to
the audio can be recorded together with it.
XD-6...series, XD-8...series :
the audio can be recorded together with it, but the effects obtained
by surround playback or DSP playback cannot be recorded to-
gether with the audio.
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Program Play"
"Recording Options"
"Audio Options"
"Clock Options"
"Surround Setup"
+Scrolled display (Recording Options)
R e c o r d i n g
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Direct Recording"
"CD Program Recording"
"Timer Recording"
+Scrolled display (CD Program Recording)
C D P r o g r a m
+Scrolled display
(Press 'ENTER' to Start, 'JOG' to Check)
P r e s s ' E N T
÷ The program mode is maintained even after completion
of recording. To return to the normal mode, it is required
to cancel the program mode.
Convenient CD recording
XD-SERIES (EN/M,T)
¤
W
The equalizer effect applied to
E
(Except for XD-7...series)
Lights
Lights
‡
49