Recording Only Desired Titles (One Touch Edit - Kenwood XD Series Instruction Manual

Recording only desired titles
At the time of CD playback, any desired title can be selected immediately for recording.
When recording sound from the M D recorder to a cassette deck, be sure to read the instruction manual of the optional M D
recorder (DM -F70).
When equalizer or another effect is applied to the
sound, the sound w ith the applied effect can be re-
corded.
1
Preparation
1 Load a cassette tape in deck B.
2 Select the tape transport direction (2 or 3).
3 Select ""","[" (tw o-side recording).
4 Select the Dolby NR mode.
5 Select the "CD" input.
6 Insert disc(s) in the CD player.
2
Play a CD.
3
W hen you w ant to record a track being played, press the O.T.E. key.
To end recording in the middle
Downloaded from: http://www.usersmanualguide.com/
6
O.T.E.
MD TAPE CD TAPE
7
÷ Both the cassette deck and CD player stop.
(ONE TOUCH EDIT.....single title recording)
If you record a CD using the SRS 3D system, it is recom-
mended to use the CCRS.
Note Note
P
¤
X-H5
÷ Playback restarts from the beginning of the track being played and
recording starts at the same time.
When recording has been completed, a non-recorded portion of
4 seconds w ill be produced and the cassette deck part w ill stop.
The CD player w ill enter temporary stop condition.
To record a different track, repeat the steps 2 and 3.
Convenient CD recording
Lights
MD TAPE CD TAPE
O.T.E.
53
XD SERIES (En/ E2 )