Dsp (Digital Signal Processor) Playback - Kenwood XD-951 Instruction Manual

54

DSP (Digital Signal Processor) playback

The DSP mode uses the digital processing capability of the DSP to create the reverberation components (factors of sound
reflections in a variety of spaces), that determine the feeling of presence, without altering the quality of the music source.
DSP mode
The DSP mode creates the ambiance of a hall, disco or live house from any kind of program source. This mode is particularly effective
when listening to a stereo program source such as a CD, TV and FM broadcasting. Although the DSP mode can create a simulated stereo
surround effect from a monaural source, the proper effect may not be obtained depending on the played software.
Set the DSP mode
1 Press the MENU key.
2 Select the LISTEN MODE.
1
(Go to next step within 15 sec.)
3 Select the DSP.
1
(Go to next step within 15 sec.)
4 Select any of the DSP.
1
MENU
2
SET
2
SET
2
ENTER
If you are operating the main unit, press the LISTEN MODE key
then select by turning the MULTI CONTROL jog dial in place of press-
ing the "@ #" key of the remote control unit.
| Scrolled display (SELECT MODE)
s E L E
÷ To cancel the listening mode, press the MENU key again.
÷ When the number of displayed characters exceeds 10, the characters
are first scrolled then stop.
CD PGM (Displayed only when the CD input is selected)
DUBBING (Displayed only when a tape is in deck B)
SOUND
DISPLAY
TIMER
LISTEN MODE (Scrolls then stops.)
MODE
DOLBY PRO LOGIC
DOLBY 3 STEREO
STEREO
DSP
DISCO
HALL
LIVE
RETURN ..... Returns to 3 of 1.
To cancel DSP play
Effective Sound Adjustment
XD-951/A900/A700 (En)
C T M O D
Selected mode is displayed.
D s P O 4
Selected mode is displayed.
D I s C O
STEREO