Recording The Programmed Titles (Cd Program Recording) - Kenwood XD-853 Instruction Manual

Recording the programmed titles
Program the desired tracks from up to 3 CD discs
in the desired order and record the programmed
playback onto tape.
Recording preparations are required. •
1
Select "Recording Options" .
MENU
2
Select "CD Program Recording".
3
Program the desired tracks.
1
Select tracks in the order you want to
play them. (Perform step 3 on page 32.)
2
Check, replace, add or delete the pro-
grammed tracks as required.
(Perform step 4 on page 33.)
4
Start recording.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
SELECT
SELECT
ENTER
(CD PROGRAM RECORDING)
When the equalizer or other effects are ap-
plied to the sound, the effect applied to the
sound can be recorded.
(Steps 1 to 4)
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Program Play"
"Recording Options"
"Tape Dubbing"
"Audio Options"
"Clock Options"
"Surround Setup"
"Language Options"
+Scrolled display (Recording Options)
R e c o r d i n g
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Direct Recording"
"CD Program Recording"
"Timer Recording"
+Scrolled display (CD Program Recording)
C D P r o g r a
+Scrolled display
(Press 'ENTER' to Start, 'JOG' to Check)
P r e s s
÷ The program mode is maintained even after recording is
completed. To return to the normal mode, it is required
that the program mode is cancel.
Convenient CD recording
Lights
m
' E N T
43
y
‹