Kenwood XD-951 Instruction Manual page 35

Select the "CD" input.
To repeat only one track
1 Confirm that the "PGM....." indica-
tor is not lit.
2 Select "REPEAT".
3 Select the disc.
4 Select the track.
To repeat only the programmed tracks
1 Perform the procedure in "Listening
in the desired sequence (program
playback)" till step 4 to program the
desired CD tracks.
2 Select "PGM REPEAT".
3 Start playback.
REPEAT
DISC SKIP
1 2 3
4 5 6
7 8 9
0 +10
¤
REPEAT
CD
If the "PGM....." indicator is lit, press the CD
PGM key twice to turn it off. (at an interval of
2 sec. or more)
Press the key repeatedly to switch the display.
1 REPEAT OFF
2 REPEAT
3 DISC REPEAT
4 ALL REPEAT
To stop repeated playback
Press the REPEAT key 4 times to select "REPEAT
OFF".
÷ All of the programmed tracks will be played repeatedly.
Press the key repeatedly to switch the display.
1 PGM REPEAT
2 REPEAT OFF
To stop repeated playback
Press the REPEAT key twice to select "REPEAT OFF".
To quit the program mode
Playback of CD
XD-951/A900/A700 (En)
R E P E A T A C K
P G M R E P E A T
‹
35