Let's Record; Recording On Tape - Kenwood XD-552 Instruction Manual

Let's record

28

Recording on TAPE

When equalizer or another effect is applied
to the sound, the sound with the applied
effect can be recorded.
0
PUSH
OPEN 1 1
# &
¡
2 2
REV. MODE DOLBY NR
3 3
i
3 3
1. Load a cassette tape.
A
1 Open the door of deck B.
2 Insert a tape.
3 Close the door.
2. Select the tape transport direction.
To reverse the transport direction
#
¡
1 Select deck B by pressing the
A/B key.
2 Press the play key correspond-
ing to the desired direction.
3 Stop playback (by pressing the
& key).
Check the tape transport direction indicator.
3. Set the recording condition.
1 Select the reverse mode.
2 Select the DOLBY NR mode. (XD-5...series only)
÷ The Tape Equalizer cannot be used in recording. (XD-4...series only)
Note that this cassette deck cannot record onto
Metal tapes.
Note Note Note
4 4
2 2
(Recording is available on deck B only.)
÷ Differentiation between normal
(TYPE ) and high (TYPE ) tape is
set automatically.
÷ Remove tape slack before load-
ing.
÷ When recording is started, the
tape is transported in the direction
selected in this step.
÷ Wind the tape to the position
where recording is to be started.
XD-SERIES (En)
1 1
5 5
£
ª
ª