Let's Record; Recording On Tape - Kenwood XD-853 Instruction Manual

Let's record

28

Recording on TAPE

PUSH
1 1
OPEN
2 2
REVERSE
MODE
3 3
4 4
1. Load a cassette tape.
1 Open the cassette holder
of deck B.
A
2 Insert a tape.
3 Close the door.
2. Select the tape transport direction.
To reverse the transport direction
1 Select deck B by pressing the
TAPE B key.
2 Press the TAPE B key so that
the desired direction indicator
appears.
3 Stop playback (by pressing the
7 key).
3. Set the recording condition.
Select the reverse mode.
÷ The Tape Equalizer cannot be used in recording.
Note that this cassette deck cannot record onto
Note Note
Metal tapes.
2 2
5 5
3 3
1 1
(Recording is available on deck B only.)
÷ Differentiation between normal
÷ Remove tape slack before load-
÷ When recording is started, the
÷ Wind the tape to the position
£
Let's record
(TYPE ) and high (TYPE ) tape is
set automatically.
ing.
tape is transported in the direction
selected in this step.
where recording is to be started.
ª