Let's Record; Recording (Deck B Only) - Kenwood XD-751 Instruction Manual

Let's record

30
Recording
(Deck B only)
0
1 1
PUSH
OPEN
2 7
REV.MODE DOLBY NR
1. Load a tape in deck B.
A
1 Open the door of deck B.
2 Insert a tape.
3 Close the door.
2. Select the tape transport direction.
To reverse the transport direction
3
1 Press the play key corresponding to
the desired direction.
2 Stop playback (by pressing the &
key).
2 2
÷ When recording is started, the tape is trans-
ported in the direction selected in this step.
÷ Wind the tape to the position where recording
is to be started.
3. Set the recording condition.
1 Select the reverse mode.
2 Select the Dolby NR mode.
3 3
Note that this cassette deck cannot record onto Metal tapes.
Note
Note
When equalizer or another effect is applied to the sound, the sound
with the applied effect can be recorded.
4 4
3 3 2 2
1 1
5 5
÷ Differentiation between normal (TYPE ) and
high (TYPE ) tape is set automatically.
÷ Remove tape slack before loading.
(Except for some areas)
÷ When the microphone is not used, set the MIC
VOL. control knob fully counterclockwise to
the minimum position.
Check the tape transport direction
indicator.
T A P E B 0 0 0 0
NR
Transport direction
XD-SERIES (En)
p