If the front seats are too far back, we recommend taking out the rear head re-
straints before the seat backrests are folded forward, to achieve a loading
space that is as horizontal as possible
Fold down split seat backrest
›
Press the release knob
» Fig.
A
›
Fold the seat backrest completely forwards.
Fold down undivided seat backrest
›
Push the release handles
» Fig. 77
A
the same time.
›
Fold the seat backrest completely forwards.
Fold back split seat backrest
›
If you removed the head restraint, you need to reinsert it with the backrest
tilted slightly forwards
» page
83.
›
Hold the rear outer seat belt
C
›
Then push the seat backrest back into the upright position until the securing
knob
clicks into place - check by pulling on the seat backrest
A
›
Make sure that the red pin
is hidden.
B
Fold back undivided seat backrest
›
If you removed the head restraints, you need to reinsert them with the back-
rest tilted slightly forwards
» page
›
Hold the rear outer seat belts
›
Then push the seat backrest back into the upright position until the release
levers
on either side of the seat back click into place - check by pulling on
A
the seat backrest
»
.
›
Make sure that the red pins
B
WARNING
The seat belts and the belt locks must be in their original position after
■
folding back the seat backrests - they must be ready to use.
The seat backrests must be securely latched in position so that no ob-
■
jects from the luggage compartment can slip into the passenger compart-
ment under sudden braking - risk of injury.
In occupied rear seats make sure that the respective seat backrests are
■
properly engaged.
88
Operation
»
.
77.
on both sides of the seat backrest at
against the side trim panel.
83.
against the side trim panel.
on both sides of the seat back are not visible.
CAUTION
Ensure that the seat belts are not damaged when operating the seat backr-
■
ests. Under no circumstances must the rear seat belts be jammed by the fol-
ded back seat backrests.
Store the head restraints that were removed in such a way that they are not
■
damaged or soiled.
Rear seat folded forward (Superb Combi)
»
.
›
Pull up the seat squab in the direction of the arrow
wards in the direction of the arrow
Note
To achieve a loading space that is as horizontal as possible, the rear head re-
straints can be removed before folding the seat backrests forwards. Store the
removed head restraints in such a way that they are not damaged or soiled.
Practical features
Introduction
This chapter contains information on the following subjects:
Car park ticket holder
Folding the seat cushion for-
wards
» Fig. 78
and fold for-
1
.
2
89
89
90
90
90
91
91
92