If the Pushbutton menu item is selected in the instrument cluster, the Wi-Fi
connection is made automatically.
If the WPS PIN menu item is selected in the instrument cluster, then a PIN
must be entered in the device to be connected and the instrument cluster.
Use WLAN network in MAXI DOT display
When a Wi-Fi network is switched on, the following menu items are displayed
when the Wi-Fi menu item is selected:
Off - Switch off the WLAN network (depending on the context)
■
Device list - Display a list of external devices
■
Active device - Display a list of active devices
■
Block - Block device connections
■
Known devices - Display a list of known devices
■
Rename - Rename the device
■
■
Block - Block device connections
Device blocked - Display of a list of blocked devices
■
Unblock - Remove the connection block
■
■
Delete lists - Delete device lists
Known devices - Delete the list of known devices
■
Device blocked - Delete the list of blocked devices
■
■
Both lists - Delete both device lists
Password - Use of password to log on to the WLAN network
■
Show - Display a password to log on to the WLAN network
■
■
Generate - Generate a new password to log on to the WLAN network
Wi-Fi Name - Use of WLAN network name
■
Show - Display the WLAN network name
■
■
Rename - Rename the WLAN network
WPS config. - Wi-Fi network connection using WPS
■
Pushbutton - Automatic connection
■
■
WPS PIN - PIN entry for the connection
Data counter - Display information about the volume of data transferred
■
Current Connection - display of the volume of data transferred for the cur-
■
rent connection
Total - Display of the total volume of data transferred
■
Reset - Resetting of the information about the volume of data transferred
■
■
Settings - WLAN network settings
Access point - Access point settings
■
Settings - Access point management
■
■
APN - Change the access point name
User name - User Name
■
Password - Password
■
■
Reset - Reset access point factory settings
Prioritisation - Set the connection priority
■
Calls - Set the connection priority for calls
■
■
Data - Set the connection priority for data transfer
Encryption- Set the encryption
■
WPA2 - Enable WPA 2 encryption
■
Open - No encryption
■
Visibility - Set the WLAN network visibility
■
Visible - WLAN network is visible to other devices
■
Invisible - WLAN network is not visible to other devices
■
Data roaming - Set the data roaming
■
No roaming - Data roaming is not allowed
■
Allow - Data roaming is allowed
■
Always ask - Question setting for data roaming
■
■
Wi-Fi Channel - Select WLAN network channels (preferably set to channel
11)
Channel 1 ... Channel 11 - Display the WLAN network channels
■
■
Reset - Reset Wi-Fi network factory settings
Voice control
Introduction
This chapter contains information on the following subjects:
Dialogue
Voice commands - GSM II
Voice commands - GSM III
Communication and multimedia
132
133
133
131