Daylight Running Lights (Day Light); Turn Signal And Main Beam - Skoda Superb Owner's Manual

Daylight running lights (DAY LIGHT)


Read and observe on page 67 first.
The daytime running lights (hereafter only function) provide lighting for the
front of the vehicle.
The lights are switched on automatically if the following conditions are met.
The light switch is in the position  or 

The ignition is switched on.

The parking aid is activated.

Deactivating the function
›
Switch off the ignition.
›
Pull the turn signal- and main beam lever
the steering wheel, push down and hold in this position.
›
Switch on the ignition.
›
Hold the lever in this position for at least 3 seconds after switching on the
ignition.
Activating the function
›
Switch off the ignition.
›
Pull the turning signal and main beam lever towards the steering wheel,
push it up and hold it in this position.
›
Switch on the ignition.
›
Hold the lever in this position for at least 3 seconds after switching on the
ignition.
On vehicles with MAXI DOT display, the function can be enabled or disabled in
the menu item Dayl. dri. light » page 47
WARNING
When the daytime running light is switched on, the parking lights (neither
at the front nor the rear) and the number plate lights are not lit. Therefore
always switch on the low beam when the visibility is poor.
» Fig. 49 on page 68.
(» Fig. 50 on page 69) towards
.

Turn signal and main beam


Read and observe on page 67 first.
Lever positions » Fig. 50
Switch on right turn signal
A
Switch on left turn signal
B
Switch on high beam (spring-loaded position)
C
Switching off main beam / switching on headlamp flasher (spring-loaded
D
position)
Main beam
The main beam can only be switched on when the low beam lights are on.
The warning light illuminates in the instrument cluster when the high beam

is switched on.
Flasher
The headlight flasher can be operated even if the ignition is switched off.
The warning light illuminates in the instrument cluster when the headlight
flasher is switched on.
Flashing
When the left turn signal switch is switched on, the indicator light
the instrument cluster.
When the right turn signal switch is switched on, the indicator light
in the instrument cluster.
The turn signal light switches itself off automatically when driving around a
curve or after making a turn.
The warning light flashes at twice its normal rate if a bulb for the turn signal
light fails.
Fig. 50
Operating lever: Turn signal and
main beam operation
flashes in

flashes

Lights and visibility

69