Switch the intensive windscreen heater on/off
Air flow to the windows
Air flow to the upper body
Air flow in the footwell
Switching the rear window heater on/off
Control the seat heater on the front left seat
Switching automatic mode on
Switching Climatronic system off
Switch the cooling system on/off
Switch the temperature setting in Dual mode on/off
Control the seat heater on the front right seat
Note
Do not stick anything on or cover the interior temperature sensor
wise it could have an unfavourable effect on the Climatronic.
automatic mode
The automatic mode is used in order to maintain a constant temperature and
to demist the windows in the interior of the car.
Recommended setting for all periods of the year
›
Set the required temperature between +18 °C and +26 °C: we recommend 22
°C.
›
Press the button
» Fig. 126
›
Set the air outlet vents 2 and 3
directed slightly upwards.
After pressing, a warning light in the top right or left corner of the button
illuminates, depending on which mode was last selected.
If the warning light in the top right corner of the button illuminates, the
Climatronic operates in "HIGH"-mode.
The "HIGH" mode is the standard setting of the Climatronic.
Upon pressing the button again, the Climatronic switches to "LOW"-mode
and the warning light in the top left corner illuminates. The Climatronic uses
only in this mode the lower blower speed. However taking into account the
noise level, this is more comfortable, yet be aware that the effectiveness of
the air conditioning system is reduced particularly if the vehicle is fully occu-
pied.
116
Operation
» page 75
» page 85
» page 116
» page 116
» page 116
» page 85
on page 115.
» Fig. 123
on page 110 so that the air flow is
By pressing the button again, it is changed to "HIGH"-mode.
Automatic mode can be switched off by pressing any of the air distribution
buttons or by increasing/decreasing the blower speed.
Switching the cooling system on/off
›
Press the button .
The warning light in the button illuminates.
›
Press button once more.
The warning light in the button goes out.
After the cooling system is switched off, only the ventilation and heating func-
tion remains active whereby the minimum temperature that can be reached is
the outside temperature.
, other-
E
Setting the temperature
The interior temperature for the left and right side can be set separately or to-
gether.
For both sides
›
Turn the control dial
or decrease the temperature.
The warning light in the button does not illuminate.
For the right side
›
Turn the control dial
or decrease the temperature.
The warning light in the button illuminates.
If the warning light in the symbol button is lit, the temperature for both
sides cannot be set with the control dial
pressing the symbol button . The warning light in the button goes out.
The interior temperature can be set between +18 ℃ and +26 ℃. The interior
temperature is regulated automatically within this range.
If a temperature lower than +18 °C is selected, a blue symbol illuminates at the
start of the numerical scale.
If a temperature higher than +26 °C is selected, a red symbol illuminates at the
start of the numerical scale.
» Fig. 126
on page 115 to the left or right to increase
A
» Fig. 126
on page 115 to the left or right to increase
D
. This function can be restored by
A