Heating Curve Level - Viessmann Vitocal 300-G Installation And Service Instructions Manual

Activating the remote control
Vitotrol 200 installation instruc-
tions

Heating curve level

Parameter
2006 - HK A1
3006 - HK M2
4006 - HK M3
Heating curve slope
Parameter
2007 - HK A1
3007 - HK M2
4007 - HK M3
Room hook-up slope
Parameter
200A - HK A1
300A - HK M2
400A - HK M3
Access
"Device settings"
"Programming"
"Heating circ. 1"
y until "Room t hook-up slope"
is highlighted
Control settings, heating circuits
(cont.)
Separate setting of switching times for
all heating circuits A1, M2 and M3.
Operating instructions
Separate setting of switching times for
all heating circuits A1, M2 and M3.
Operating instructions
The slope for room temperature hook-
up can be selected, subject to a room
temperature sensor being installed
and room temperature hook-up being
enabled (see page 168).
The higher the selected value, the
greater the influence of the room tem-
perature.
l or m
As for heating circuit 2 and heating
circuit 3
Standard setting
Setting range
10
0 to 50
167