Compressor Control Settings Compressor Enable - Viessmann Vitocal 300-G Installation And Service Instructions Manual

Compressor control settings
Compressor enable
Parameter
5000
Access
"Device settings"
"Programming"
"Compressor"
y to"Enable"
Heat pump output
Parameter
5030
Entry of the output for the energy
statement. If the current drawn and
the heating energy transferred to the
heating system are to be determined
in the statistic area, then the heat
pump output details must be matched
to the actual values.
Type
BW/BWC 106
BW/BWC 108
BW/BWC 110
BW/BWC 112
BW/BWC 114
BW/BWC 117
148
Standard setting
Setting range
Note
Pressing standard settings key ª
or i to achieve a reset from the
main menu returns the output value
into the delivered condition (standard
setting). A different value than the
actual heat pump output in the stan-
dard condition results to the display of
incorrect values in the energy state-
ment.
Access
Output in kW
"Device settings"
6
"Programming"
8
"Compressor"
10
y to"Output"
12
l or m
14
17
Standard setting
Setting range
Yes
Yes/No
10 kW
1 to 255 kW