Further Details Regarding The Individual Steps - Viessmann Vitocal 300-G Installation And Service Instructions Manual

Further details regarding the individual steps

Removing the top panels
Danger
Touching 'live' components can
result in the transfer of danger-
ous body currents.
Never touch the terminals
near the connections (see
page 61) and in the control
module below.
If the appliance is 'live', the
contact shield must be fitted
as cover for the electrical com-
ponents.
Danger
The absence of earthing on the
components can transfer dan-
gerous body currents and may
damage the equipment, should
an electrical fault occur.
Always reinstate the earth
conductor connections when
refitting the panels.
Removing the transport brackets
Only required prior to commissioning in the delivered condition.
Commissioning, inspection, maintenance
!
Please note
Wait at least 30 min between
the installation and the com-
missioning of the appliance to
prevent equipment damage.
Work on the refrigeration cir-
cuit must only be carried out
by a qualified refrigeration
engineer.
For work in connection with the com-
missioning, inspection and mainte-
nance, front panel, side panel and
front top panel (see page 59) must be
removed.
Regarding commissioning this
appliance, see also the operat-
ing instructions.
103