Stop Optimisation Dhw - Viessmann Vitocal 300-G Installation And Service Instructions Manual

Stop optimisation DHW

Parameter
600A
DHW auxiliary function
Parameter
600B
Set DHW temperature 2
Parameter
600C
Temp. sensor 2
Parameter
600E
A second temperature sensor offers
an improved utilisation of the DHW
cylinder. It is fitted below the top tem-
perature sensor.
This temperature sensor (lower) is
used as stop criterion for the once-
only DHW heating through the
demand "max. DHW volume" or in the
switching stages "Standard" or "Set
temp. 2".
DHW control settings
Operating instructions
Operating instructions
Operating instructions
DHW heating is started with the
switching times stages using the
upper temperature sensor, in case of
max. DHW volume using the lower
temperature sensor.
Access
"Device settings"
"Programming"
"DHW"
y to"Temp. sensor 2"
"YES" or "NO"
Standard setting
Setting range
No
Yes/No
155