Set Flow Temperature, External Demand - Viessmann Vitocal 300-G Installation And Service Instructions Manual

Screed program
(cont.)
Temperature/time profile 6
Within the temperature/time profiles 7
to 12, the system regulates to the pro-
grammed value (max. flow tempera-
ture) for a period of between 5 and 30
days (see page 168).
Temperature/time
profile
Profile 7
Profile 8
Profile 9
Profile 10
Profile 11
Profile 12

Set flow temperature, external demand

Parameter
730C
A Flow temperature
B Days
Access
"Device settings"
"Programming"
y to "Internal hydraulics"
Duration of y to "Screed program"
max. flow l or m
temperature
5 days Standard setting
10 days Setting range
15 days
20 days
25 days
30 days
Here, the temperature delivered by
the heat pump after an external con-
trol/demand as external heat source
is selected.
Control settings, hydraulics
0
0 to 12
161