Viessmann VITOTRONIC300 Installation And Service Instructions Manual page 119

Vitotronic 300, GW2B Installation and Service
"Heating Circuit 1", "Heating Circuit 2", "Heating Circuit 3" Group
Coding in the factory set condition
E1:1 With remote control:
Set day temperature adjustable at the remote
control unit from 50 to 86°F (10 to 30ºC).
E2:50 With remote control:
No display correction of the actual room
temperature.
F1:0 Slab curing function disabled.
F2:8 Time limit for party mode or external heating
program changeover via push button: 8 h
Note: Observe settings of coding addresses
"5d", "5E", "5F" in the "General"
group, as well as "d5" and "d8"
in the "Heating circuit..." group.
F8:-5 Temperature limit for raising reduced mode
23°F (-5ºC); see example on page 83.
Observe the setting of coding address "A3".
F9:-14 Temperature limit for raising the reduced set
room temperature 7°F (-14ºC); see example
on page 83.
FA:20 Raising the set boiler water or supply
temperature by 20% when changing from
operation with reduced room temperature
to operation with standard room temperature.
See example on page 83.
Fb:60 Duration of the set boiler water or supply
temperature rise (see coding address "FA")
60 min. See example on page 83.
*1 Party mode ends automatically in the "Heating and DHW" heating program when the system changes over to
operation with standard room temperature.
Possible change
E1:0 Set day temperature adjustable from 37.5 to
73.5°F (3 to 23ºC).
E1:2 Set day temperature adjustable from 62.5 to
98.5°F (17 to 37ºC).
E2:0 Display correction –5 K
to to
E2:49 Display correction –0.1 K
E2:51 Display correction +0.1 K
to to
E2:99 Display correction +4.9 K
F1:1 Only for heating circuits with mixing valve:
to Slab curing function adjustable in accordance
F1:6 with 6 optional temperature/time profiles
(see page 107).
F1:15 Constant supply temperature 68°F (20°C)
(see page 107).
F2:0 No time limit
*1 .
F2:1 Time limit adjustable from 1 to 12 h
to
F2:12
F8:+10 Temperature limit adjustable from
to +50 to -76°F (+10 to -60°C).
F8:-60
F8:-61 Function disabled.
F9:+10 Limit for raising the set room temperature to
to the value selected for standard mode adjustable
F9:-60 from +50 to -76°F (+10 to -60°C).
FA:0 Temperature rise adjustable from 0 to 50%.
to
FA:50
Fb:0 Duration adjustable from 0 to 300 min;
to 1 step
Fb:150
*1 .
2 min.
Code 2
(continued)
*1 .
119