PCI Express Boards
Setting up the Driver
This section covers some of the setup program's most frequently used functions. For complete details, press F1
to open the on-line help file.
1. Run BIN\SETUP.EXE.
2. Press Enter to select the model name of the Moxa board you are installing.
3. A window will open displaying basic configuration information for all boards of this type currently installed
in the system. Press PgDn to configure the port settings.
4. You may enter or modify the settings of each port at this stage. The values displayed first are the port's
initial values that were set up when the driver was installed.
5. Press F10 to save the changes and exit the SETUP program.
3-50
Software Installation
Need help?
Do you have a question about the PCI Express Board and is the answer not in the manual?