Different Size Originals - Canon imageRUNNER 2030i Copying Manual

Different Size Originals

This mode enables you to copy different size originals together.
IMPORTANT
•
The Different Size Originals mode cannot be used with the Book 2-Sided, 2-Page
Separation, Image Combination, or Frame Erase mode.
3
•
If the originals are placed in the feeder, make sure that the different size originals are of
the same weight (paper type).
•
Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths. ("Width" refers to the vertical measurement of the paper
from the front of the machine to the back of the machine when the paper is placed in the
feeder or on the platen glass.)
•
If originals with different widths are placed in the feeder, set the differently sized originals
in the following combinations. Other combinations may damage the originals.
- 11" x 17" and LGL, 11" x 17" and LTRR, 11" x 17" and STMT, LTR and LGL, LTR and
•
If you place originals with different widths into the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
•
If you place originals with different widths, stapling cannot be performed depending on
the combination of originals.
•
If you specify the Different Size Originals mode with the Automatic Paper Selection
mode, Auto Orientation is not performed.
•
If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
NOTE
If the Different Size Originals mode is used with the 1 2-Sided mode, the copies are
output as one-sided copies on paper of their respective sizes if the originals for the front
and back sides of a two-sided copy are different in size.
3-22

Different Size Originals

LTRR, LTR and STMT